|
Alpine Accessories service information
Keeping your equipment in top shape allows
you to turn easier, have more control and your equipment will last longer. Alpine Accessories offers a complete selection of
service work. Best of all, it's done in our store by our trained and
certified technicians to give you quicker turn around and better quality
service.
How often should you tune your equipment?
Advanced to experts
should tune their
equipment every 3-5 times out on the slopes.
Intermediate to advance should tune their
equipment every 5-7
days on the slopes.
Novices should tune their
equipment every 7-9 days on the slopes but wax 3-5 days.
For more on tuning, go to our
"How to Tell Your
Equipment Needs Tuning and Why" page.
For more info on how to tune, go to our
"Basic Tuning
Information" page.
How often should you
wax?
Advanced to experts
wax their
equipment every 2-3 times out on the slopes.
Novices to advance should
wax their
equipment every 3-5
days on the slopes.
For more on how to wax, go to
our "Basic
Tuning Information" page.
How often should you have your bindings checked?
All skiers should have
their bindings checked after every 15 days of use.
| |
TUNES |
November,
December,
January, February |
September, October,
March,
April |
|
Skier type I tune: |
Belt sand bases, repair gouges*, sharpen edges, bevel base edges to 2
degrees, |
$45.00 |
$39.00 |
|
(novice-intermediate skiers) |
stone grind bases to finish, de-tune tips & tails, iron on universal
wax and buff. |
|
|
|
|
|
|
|
|
Skier type II tune: |
Belt sand bases, repair gouges*, sharpen edges, bevel base edges to 1.5
degrees, |
$45.00 |
$39.00 |
|
(intermediate-advanced skiers) |
stone grind bases, de-tune tips & tails, hand iron with universal wax
and buff. |
|
|
|
|
|
|
|
|
Skier type III tune: |
Belt sand bases, repair gouges*, sharpen edges, bevel base edges to
1 degree, |
$45.00 |
$39.00 |
|
(advance-expert skiers) |
stone grind bases, hand file and polish edges, de-tune tips & tails
and establish |
|
|
| |
a right & left ski, hand iron with universal or temperature wax and
buff. |
|
|
|
|
|
|
|
|
Snowboard tune: |
Belt sand base, repair gouges*, sharpen edges, bevel base edges to 1
degree, |
$45.00 |
$39.00 |
|
(all levels) |
stone grind base to finish, de-tune tips & tails, iron on universal
wax and buff. |
|
|
|
|
|
|
|
|
X-C ski tune: |
Machine belt sand bases, repair gouges*, iron on universal glide wax
and buff |
$35.00 |
$29.00 |
|
|
|
|
|
|
|
|
|
|
| |
MISCELLANEOUS TUNE WORK |
Purchased
elsewhere |
Purchased at
Alpine |
|
New ski or board prep |
Check bases and bevels, sharpen edges, tune to ability level, hot wax
and buff |
$29.00 |
$19.00 |
|
Hot Wax |
Clean bases, iron on wax, scrape excess wax and buff. |
$15.00 |
$15.00 |
|
Edge sharpening |
Edges machined sharpened and burrs removed. |
$20.00 |
$20.00 |
|
Base & edges touch-up |
Bases & edges machine belt sanded then stone grind to finish & burrs
removed. |
$25.00 |
$25.00 |
|
Base splice |
Repair base that is damaged to the core. |
$50.00 |
$50.00 |
|
|
|
|
|
| |
Binding work |
Purchased
elsewhere |
Purchased at
Alpine |
|
Binding
install & test |
Ski bindings installed, adjusted and tested |
$49.00 |
$29.00 |
|
Binding adjust & test |
Adjust and test bindings |
$25.00 |
$25.00 |
|
Board binding install |
Snowboard bindings installed |
$25.00 |
$19.00 |
|
X-C binding install |
Cross country bindings install |
$25.00 |
$19.00 |
|
|
|
|
|
| |
Miscellaneous work |
|
|
|
Tune lesson |
1 hour tuning lesson |
$20.00 |
$20.00 |
|
Bench use |
1 hour use of tuning bench and most tools. NO Machine work. |
$10.00 |
$10.00 |
|
custom boot fitting |
Custom boot fitting or service per hour charge. Insoles if needed are
additional. |
$39.00 |
$25.00 |
| |
as of November, 2009 |
|
|
|
