Hotronic Footwarmer Power Plus S3 with Semi Custom insoles
Detailed Description
Hotronic FootWarmer Power Plus S3 Series boot heating system with BD Semi Custom insoles
Power Plus S3 Footwarmer with Semi Custom Insoles
by Hotronic
Our Price $224.00
| MSRP 260.00
| In stock
| New
Looking for that extra edge in performance and comfort? Then the Hotronic FootWarmers S3 Series with semi custom insoles has the solution. Hotronics FootWarmers Power Plus S3 Series battery packs have four different heat settings that allow you to maintain the comfort level and warmth in your feet. No matter how cold it is, your feet can stay nice and cozy.
HOTRONIC S3 SERIES BATTERY
The batteries weigh only 4.5 ounces per battery pack and are powered by high capacity, cold temperature operation, with 3 NiMH cells.
You get four (4) temperature settings for your personal comfort. The settings are easy to adjust by push button controls on top of the battery packs.
The easy to read LED on the battery pack indicates the setting selected and power on / off.
NiMH cells do not have memory effect and DO NOT require full discharging before recharging.
The clips on the rear of the batteries allow you to attach them securely to almost any footwear. Go to the Attaching The Battery Info Page for more info.
TEMPERATURE and DURATION Setting 1- 84 - 98°F, 29 - 37°C, lasts 14.5 - 17.75 hrs
Setting 2- 107 - 121°F, 42 - 49°C, lasts 5.5 - 7.75 hrs
Setting 3- 122 - 138°F, 50 - 59°C, lasts 3.5 - 5.75 hrs
Setting 4- 158 - 173°F, 70 - 78°C, lasts 2 - 3.5 hrs
Temperature and duration ranges are determined from test results with battery packs in ambient conditions of +4°F to -9°F.
HOTRONIC BATTERY CHARGER
Advanced global charging technology with overcharge protection and input range of 100V-240V. Includes North American and European plug adapters.
Recharges both batteries in 3 hours or less. Then recharger LEDs indicate recharging mode and battery charge status and are compatible with all M3, M4, E3, E4, S3, and S4 batteries.
BD SEMI CUSTOM INSOLES
Easily installs in many types of footwear and can transfer from one pair of footwear to another. Use for skiing, snowboarding, hunting, ice fishing, or during any general cold-temperature activity.
The BD anatomic shaped insoles offer more comfort and support than flat insoles because it has a shaped heel cup and arch support.
The heating elements are pre installed in the toe area for easy installation.
Large oval heating elements provide effective anatomical coverage of toes and are pre installed in the toe area of the Hotronic BD Semi Custom Insoles making installation a snap.
YOU'LL RECEIVE WITH YOUR PURCAHSE
TWO S3 Series battery packs that have Integrated Heat Regulators.
ONE pair of BD semi custom insoles with heating elements pre installed in the toe area.
ONE battery charger with overcharge protection and with North American and European Plug Adapters.
Hotronic has so much confidence in their FootWarmer Power Plus models that they offer a two (2) year limited warranty!
Our comments; This system is easy to install and can be easily switched from one pair of footwear to another. The BD semi custom insoles with pre installed heat elemnets offer more support than flat insoles
I wasnt sure what size to order my insoles. Do I get my shoe size or my boot size. Alpine told me to order my shoe size because he thought my boots may be too big. Turns out my boots were almost 2 sizes too big. If I had gotten the insoles to the boot size, the arch support would had been in the wrong place. Thank you for your advice Alpine!